Cannot access the hp printer utility, Some color center options are unavailable, Cannot access the embedded web server – HP Designjet Z3200 PostScript Photo Printer series User Manual
Page 157
●
If the printer is connected to a network, try using it when connected directly to your computer
through a USB cable.
●
If your printer is connected to your computer through any other intermediate devices, such as switch
boxes, buffer boxes, cable adapters, cable converters, etc., try using it when connected directly to
your computer.
●
Try another interface cable.
●
If the printer is connected with a USB, try to disconnect and reconnect the USB cable with the
computer. Check that the USB cable is of good quality.
Cannot access the HP Printer Utility
If you have not done so already, please read
Access the HP Printer Utility on page 19
.
1.
From the front panel, select the Connectivity menu icon
.
2.
Select Advanced > Web Services > Printer Utility Software > Enable.
3.
If you have a TCP/IP connection to your printer, select the Connectivity menu icon
again.
4.
Select the type of connection you are using.
5.
Select View Information and check that the printer has IP enabled and a valid IP address.
If you still cannot connect, switch the printer off and back on with the
Power
key on the front panel.
Some Color Center options are unavailable
If you see that some options are unavailable in the Color Center under Mac OS, this could be because
you did not install the printer queue to print to that printer, but searched for the printer directly in the HP
Printer Utility Printer Selector Screen, by going to More Printers or Add Manually.
If this is the case, you will see a green circle in the Printer Selector beside the name of your printer. If
you see a green small house, then the printer is correctly configured to print and all options will be
available.
Cannot access the Embedded Web Server
If you have not done so already, please read
Access the Embedded Web Server on page 19
NOTE:
If you connect directly to your printer with a USB cable, use the HP Printer Utility.
1.
From the front panel, select the Connectivity menu icon
.
2.
Select Advanced > Allow EWS > On.
3.
If you have a TCP/IP connection to your printer, select the Connectivity menu icon
again.
4.
Select the type of connection you are using.
5.
Select View Information.
6.
Ensure that you see IP enabled. If not, you may need to use a different connection.
ENWW
Cannot access the HP Printer Utility 147
G
e
ne
ral print
e
r
iss
u
es