Change the language of the front-panel display, Access the hp printer utility, Access the embedded web server – HP Designjet Z3200 PostScript Photo Printer series User Manual

Page 29

Advertising
background image

Change the language of the front-panel display

There are two possible ways to change the language of the front-panel menus and messages.

If you can understand the current front-panel display language, select the Setup menu icon

,

then Front panel options > Select language.

If you cannot understand the current front-panel display language, start with the printer powered
off. At the front panel, press the

OK

key and hold it down. While holding the

OK

key down, press

the

Power

key and hold it down. Continue to hold down both keys until the green light on the right

side of the front-panel display starts flashing, and then release both keys. You can expect a delay
of about one second. If the green light starts flashing without any delay, you may need to start
again.

Whichever method you used, the language selection menu should now appear on the front-panel
display. Highlight your preferred language with the

Up

and

Down

keys, then press the

OK

key.

When you have selected your preferred language, turn off the printer with the

Power

key and then turn

it on again. The front panel will appear in the selected language.

Access the HP Printer Utility

The HP Printer Utility enables you to manage your printer from a computer with a USB connection and
TCP/IP.

Under Windows, start the HP Printer Utility from your desktop shortcut or from Start > All
Programs
> Hewlett-Packard > HP Printer Utility > HP Printer Utility. This launches the HP
Printer Utility showing the printers installed in the Printers and Faxes window.

Under Mac OS, launch the HP Printer Utility from your dock shortcut or by selecting
STARTUP_DISK > Library > Printers > hp > Utilities > HP Printer Utility. This launches the HP
Printer Utility Printer Selector, showing the printers installed in the Printer Setup Utility (Mac OS X
10.4) or Print & Fax (Mac OS X 10.5 or later).

Select your printer and click Select. This launches the HP Printer Utility.

If you have followed these instructions but failed to get through to the HP Printer Utility, see

Cannot

access the HP Printer Utility on page 147

.

Access the Embedded Web Server

The Embedded Web Server enables you to manage your printer remotely using an ordinary Web
browser running on any computer.

NOTE:

To use the Embedded Web Server, you must have a TCP/IP connection to your printer.

The following browsers are known to be compatible with the Embedded Web Server:

Internet Explorer 6 or later for Windows

Netscape Navigator 6.01 or later

Mozilla 1.5 or later

Mozilla Firefox 1.0 or later

Safari 2 or later for Mac OS

ENWW

Change the language of the front-panel display

19

P

e

rs

o

n

al

se

tt

ings

Advertising