HP ProLiant DL585 Server - Manual (Page 149)

System LEDs and switches
HP ProLiant DL585 Server User Guide E-13
Table E-10: QuickFind diagnostic display LEDs continued
Item Description Status Action
3 Processor
memory board
Off = Normal
On = Attention required
Processor memory board power failure. If
problem persists, replace the processor or
processor memory board.
4 Processor
power module
Off = Normal
On = Attention required
PPM power failure. If problem persists,
replace PPM.
If the PPM and the BRD LEDs are both on,
there is a configuration error.
5 Temperature Off = Normal
On = Attention required
One or more components have
experienced an elevated temperature or a
thermal shutdown.
A thermal shutdown is indicated by the
Therm Trip LED.
•
Be sure the processor
heatsink is properly attached.
•
Be sure there are no 1.7"
DIMMs installed that prevent airflow
across the processor heatsink).
•
Be sure that all fans are
installed and working properly.
•
Be sure that the server
environment meets posted
requirements.
For information about server environment
requirements refer to the “Optimum
environment” section in Chapter 3.
6 DIMM Off = Normal
On = Attention required
DIMM failure or configuration error. Refer to
the IML or POST messages
7 I/O power fault Off = Normal
On = Attention required
A power fault on the system I/O board
occurred. If problem persists, replace the
system I/O board.
continued