HP XP Command View Advanced Edition Software - Manual (Page 122)

Performing Host Operations 122
2. Select the desired host in the navigation frame (in this example, aibetsu).
The Show Properties subwindow for aibetsu displays in the information frame, as shown in
Figure 9-4 .
Figure 9-4 Viewing Host Properties
The Show Properties subwindow displays the following information for the host you selected: Name, IP
address, Capacity (total capacity of storage (volumes) allocated to the host), Type (host type), and
WWNs assigned to the host.
You can select the following operations: Remove Storage (refer to section 7-6-5 ), Move Storage, Refresh
(see section 9-6 ). Remove Storage and Move Storage are displayed when storage (volumes) is allocated
to the selected host. Refresh is displayed when the Device Manager agent is installed in the selected
host.
• If storage has been allocated to the host. The information frame lists the volumes accessible to the
host. This frame also displays the LDEV number, LDEV type, and path for each volume. This window
provides the filtering feature. For details about the filtering feature, see section
5-2 . In Object List, you
can use the Select All and Unselect All options and sort the displayed items.
• If copy pairs are managed for the selected host. When the copy pair requirements are met, the
information frame provides the following operations for managing copy pairs: Create Pair, Modify Pair
(available only when one or more copy pairs are managed by the host), Delete Pair (available only
when one or more copy pairs are managed by the host), and View Pair (available only when one or
more copy pairs are managed by the host).
NOTE: The Create Pair, Modify Pair, and Delete Pair buttons do not appear when you have logged
on as a guest or local guest.
• If copy pairs are managed in a batch configuration. The Replication Management Console drop-down
list shows the hosts that manage copy pairs that meet the requirements. Also, you can manage copy
pairs from the information frame by using the following commands: Create Pair, Modify Pair, Delete
Pair, and View Pair.