Viewing the open-allocated group for a subsystem – HP XP Command View Advanced Edition Software User Manual
Page 100
All Storage/My Storage Operations 100
Figure 8-2
Viewing a Storage Subsystem Group in All Storage/My Storage
When you select and expand a storage subsystem group in the All Storage/My Storage group, Device
Manager displays the Open-Allocated group (see section
8-2-1
), Open-Unallocated group (see section
8-2-2
)
and the Mainframe-Unspecified group (see section
8-2-3
) for the selected storage subsystem.
*The GB and TB capacity values are rounded down to two decimal places. The MB capacity values are
rounded down to whole numbers. As a result, the capacity shown on the Device Manager window may be less
than the actual capacity available.
8-2-1 Viewing the Open-Allocated Group for a Subsystem
When the Open-Allocated group for a storage subsystem is selected (see
Figure 8-3
), the method frame
provides access to the LUN Scan operation for the selected storage subsystem. For instructions on performing
a LUN Scan operation, see section
8-3
.
When the Open-Allocated group for a storage subsystem is selected, the information frame displays the
following information:
•
Name. Name of the storage subsystem
•
Number of LDEVs. Number of LDEVs/LUs for which paths are allocated, for open volumes in the storage
subsystem
•
Open-Allocated Capacity. Total capacity of LDEVs/LUs for which paths are allocated, for open volumes in
the storage subsystem. (The GB and TB capacity values are rounded down to two decimal places. The
MB capacity values are rounded down to whole numbers. As a result, the capacity shown on the Device
Manager window may be less than the actual capacity available.)