HP XP Command View Advanced Edition Software - Manual (Page 107)

All Storage/My Storage Operations 107
Table 8-2 Unallocated Group Information under All Storage/My Storage
Column Description
Copy Status Copy status:
•
Simplex
= SMPL status
•
Pair
= PAIR status
•
Copying = COPY (PD), COPY (RS), COPY (SP), or COPY status
•
Reverse-Copying = COPY (RS-R) copy status
•
Split = PSUS or PSUS (SP) copy status
•
Suspended = PSUE copy status
•
Error in LUSE
= PDUB copy status
•
Suspending
= Suspending status
•
Deleting
= Deleting status
•
None = copy status is unknown.
Use this item for filtering. You can use a partial match specification as a condition for filtering.
External
Subsystem Displays the external subsystem name. This column is displayed only for StorageWorks
XP12000/XP10000.
External subsystem name = Displayed when all the following conditions are met:
• The volume is an internal volume to which an external volume is mapped.
• Device Manager has managed the external subsystem.
• If a Local user is logging in, an external volume has been allocated to the user.
External system model#External subsystem serial number = Displayed when all the following
conditions are met:
• The user is logging in as a system user.
• The volume is an internal volume to which an external volume is mapped.
• Device Manager has not managed the external subsystem.
• The model is such that External Storage XP can acquire its serial number.
External system model = Displayed when all the following conditions are met:
• The user is logging in as a system user.
• The volume is an internal volume to which an external volume is mapped.
• Device Manager has not managed the external subsystem.
• The model is such that External Storage XP cannot acquire its serial number.
Unknown = Displayed when all of the following conditions are satisfied:
• The volume must be an internal volume to which an external volume is mapped.
• You must have logged on as a Local user.
• No external volumes are assigned to the logged-in user.
Blank = Displayed when the volume is a volume other than an internal volume to which an external
volume is mapped.
* Displayed when the storage subsystem containing the Continuous Access XP P-VOL has not been registered in Device
Manager. Since Device Manager is able to obtain information about the synchronization mode, if the target storage
subsystem (S-VOL) is a StorageWorks XP12000/XP10000 or XP1024/XP128, CA-XP(Sync) or CA-XP(Async) displays
in this column.
8-2-3 Viewing the Mainframe-Unspecified Group
When the Mainframe-Unspecified group for StorageWorks XP Disk Array is selected (see Figure 8-5 ), the
information frame displays the following information:
• Name = storage subsystem name
• Number of LDEVs = total number of mainframe volumes in the storage subsystem
• Mainframe-Unspecified Capacity* = total capacity of mainframe volumes in the storage subsystem
* The GB and TB capacity values are rounded down to two decimal places, and the MB capacity values are
rounded down to whole numbers. Thus, the capacity shown on the Device Manager window might be less than
the actual capacity available.
This panel provides the filtering feature. In Filtering, specify the conditions for the LDEVs to be displayed in
Object List to filter LDEVs. When you set conditions and click Filter, filtering is performed and matching LDEVs
are displayed. When you click Show All, filtering is canceled and all LDEVs are displayed. For details about the
filtering feature, see section
5-2 . For the items where you enter the conditions for displaying filtered LDEVs,
see Table 8-3 .
The Object List lists the LDEVs/LUs in the Mainframe-Unspecified group for the storage subsystem and
displays detailed information for each LDEV/LU (see
Table 8-3 ). To view the detailed information for a specific
LDEV, select the desired LDEV to open the Detailed Information panel (refer to Figure 7-7 ).