HP XP Command View Advanced Edition Software - Manual (Page 126)

Performing Host Operations 126
Figure 9-9 Modifying Host Properties – Confirming LUN Security Changes
9-6 Updating (Refreshing) Host Information
The system administrator, storage administrator, local system administrator, and local storage administrator
can update the host information reported by Device Manager. Guest and local guest users can view the host
information, but cannot update it.
When you update host information, Device Manager updates the information displayed in the Last Updated, %
Used, and File System fields for all storage allocated to the selected host. Device Manager also updates the
copy status for the volumes that are managed by the selected host and paired by Business Copy XP, Snapshot
XP, and Continuous Access XP. For details about the system configuration for displaying information about
Business Copy XP, Snapshot XP, and Continuous Access XP, refer to the HP StorageWorks Command View
XP Advanced Edition Device Manager Server Installation and Configuration Guide.
CAUTION: To update host information, Device Manager agent must be installed on the host.
To update host information:
1. Log in to Device Manager as a system administrator, storage administrator, local system administrator, or
local storage administrator.
2. Select and expand the Hosts object in the navigation frame (refer to Figure 9-1 ).
3. Select the host in the navigation frame for which you want to update host information (see Figure 9-10 ).
4. Select the Refresh button in the Show Properties – host-name subwindow in the information frame. The
Refresh Host - Confirmation panel displays (see
Figure 9-11 ).
NOTE: The View Pair Information panel also provides access to the update host information function.
To select a host performing batch management of pairs, select the target host from the Replication
Management Console drop-down list. Then, in the View Pair Information panel, select the Refresh
button. The Refresh Host - Confirmation panel displays.
5. Check the information in the Refresh Host - Confirmation panel. If the information is correct, select the
OK button to update the host information, or select Cancel to cancel your request to modify the host.
You are notified when the operation is complete.
CAUTION: If a copy pair for Business Copy XP or Snapshot XP for StorageWorks XP12000/XP10000 is
detected while host information is being updated, the Copy Type field for that copy pair is left blank. In this
case, you must update the information about the storage subsystem. For details on updating the storage
subsystem information, see section
10-1-4 .