2 physical view operations, Physical view operations, Figure 10-6 remove subsystem confirmation – HP XP Command View Advanced Edition Software User Manual
Page 153
Performing Storage Subsystem Operations 153
NOTE:
If you remove a storage subsystem that has alert information, and then attempt to display the alert
information for the removed subsystem, ARRAY.storage -subsystem-type (such as ARRAY.XP10000) is
displayed as the source. In this case, either delete the alert information if it is not needed, or add the storage
subsystem to Device Manager again.
To remove a storage subsystem from the Device Manager system:
1.
Log in to Device Manager as a system administrator or storage administrator.
2.
Select and expand the Subsystems object in the navigation frame, and then select the desired storage
subsystem (refer to
Figure 10-1
).
3.
In the method frame, select the Remove Subsystem method.
4.
When the Remove Subsystem – Confirmation panel displays (see
Figure 10-6
), select OK to delete the
storage subsystem, or select Cancel to cancel your request to remove the storage subsystem.
After processing finishes, completion of the operation for deleting the storage subsystem is reported.
5.
If the storage subsystem is associated with any logical groups, Device Manager displays an important
warning. After reading the warning, select YES to go ahead and remove the storage subsystem, or select
NO to cancel your request. You are notified when the remove storage subsystem operation is complete.
Figure 10-6
Remove Subsystem Confirmation
10-2 Physical View Operations
The system administrator, storage administrator, and guest can perform physical view operations. Local users
(local system administrator, local storage administrator, local guest) do not have access to this function.
NOTE:
To display a physical view panel, JRE version 1.4.2 must be installed. Physical view panels cannot
be displayed if JRE is not installed. For details on JRE, see section
3-1
.
NOTE:
To display a physical view panel for StorageWorks XP12000/XP10000, Remote Web Console must
be installed on StorageWorks XP12000/XP10000 that is to be managed by Device Manager.
The physical view of each storage subsystem provides access to the storage subsystem-based link-and-launch
applications. These include Remote Web Console (StorageWorks XP1024/XP128), and URLs for customer-
defined third-party applications (see section
2-5
). The physical view also provides access to the port, array
group, and LDEV operations for the storage subsystem (see sections
10-3
and
10-4
).
Physical view operations include:
•
Viewing and configuring detailed information for StorageWorks XP12000/XP10000 (see section
10-2-1
)