HP XP Command View Advanced Edition Software - Manual (Page 63)

Performing User Management Operations 63
NOTE: The password is case-sensitive and must be 4 to 25 bytes long. You can use the following
characters (Unicode characters from 0020 to 007E):
A-Z, a-z, 0-9, !, #, $, %, &, ', (, ), *, +, -, ., =, @, \, ^, _, |.
NOTE: If you change the password and then select CANCEL in the User Properties panel, the new
password is still applied.
Figure 6-5 Changing a Password
6-2-4 Deleting a User
The system administrator can delete existing Device Manager users as needed. The local system administrator
can delete existing users in the assigned user group and its descendant user groups. The storage
administrator, local storage administrator, guest, and local guest do not have access to this function.
CAUTION: The HaUser (peer group) must not be deleted. HaUser is the default user for logging on to the
Device Manager agent. If you delete HaUser, the Device Manager agent cannot transmit information to the
Device Manager server.
CAUTION: You can only delete a user who is logged out of Device Manager and who has been logged out
for at least 10 minutes.
To delete a user from the Device Manager server:
1. Make sure that the user you are deleting is not logged in to Device Manager and has been logged out for
at least 10 minutes.
2. Log in to Device Manager as a system administrator or local system administrator.
3. Select the User Management object in the navigation frame, and then select Users in the information
frame to open the User Administration panel (refer to
Figure 6-2 ).
4. Select the user to be deleted, and then select DELETE.
The confirmation panel displays, shown in Figure 6-6 .