HP NonStop G-Series - Manual (Page 266)

Error Messages
HP AutoSYNC User’s Guide—522580-020
D-6
Informational messages
123
Cause. An ASYSYNC process performed the TRIGGER option; it started a TACL
process or an OSS shell passing the trigger command. TACL or the OSS shell
abended. The message contains the user ID, destination node name, BATCHID, the
file-set ID, or a -1 if not available and an the error text or the error and error detail
code.
Effect. Effect. The file for which the trigger was executed is deleted and the old
destination file if it existed is restored into the destination location. The remaining files
in the file set are synchronized.
Recovery. An EMS message displays the name of the logfile SLggguuu, the key of
the log record, the SYNCfileset ID, the file error, and the filename portion of the file.
The user should then refer to the logfile for details.
124
Cause. The USER_AUTHENTICATE_ procedure failed to change the destination
ASYSYNC (or ASYSYNCP if synchronizing over TCP/IP) process state from a remote
to a local process.
Effect. The destination ASYSYNC process will abend.
Recovery. Set up the destination ASYSYNC object to allow local logon, which
requires making the procedure CALLABLE^LOCAL^LOGON callable and to license
and possibly PROGID the destination ASYSYNC object.
125
Cause. One or multiple files could not been synced during this synchronization.
Effect. One or more files were not synchronized; there may or may not be an error
associated with this; any error would be reported in the logfile. The remaining files in
the fset-ID are synchronized.
Recovery. An EMS message displays the name of the logfile SLggguuu, the key of
the log record, the fset-ID and the batch-ID. The user should then refer to the log file
for details.
Trigger TACL or OSS shell process abended
Local Logon Denied
One or multiple files not synchronized.