HP 3PAR Operating System Software - Manual (Page 108)

The following information is provided:
Description Column
The World Wide Name of the port. Port WWN
The number of the port. Each port is a link to the port summary screen. Port
The arbitrated loop physical address. AL_PA
The Fibre Channel loop either has a loss of signal (electrical or optical) or a loss
of synchronization that is greater than the time-out period. Link Fail
Fibre Channel data is not valid though there is a signal (electrical or optical). Loss Sync
Loss of signal (electrical or optical) to the receiver port of a Fibre Channel node. Loss Signal
Primitive sequence protocol error. There were errors during the transmission of a
Fibre Channel primitive sequence. This might indicate an error during the loop
recovery or initialization. Primitive Sequence
Invalid transmission word. Illegal Fibre Channel transmission word received. Invalid Word
Invalid cyclical redundancy check. Data corruption in the Fibre Channel frame. Invalid CRC
Viewing Paths
To view host paths:
1.
In the Manager Pane, select Hosts.
2. In the Management tree, select Paths under the system that contains the host paths you want
to view.
The Paths screen is divided into a list pane and a detail pane. The list pane displays a summary
of all host paths in the system. The detail pane displays detailed information about a single host
path selected from the list pane.
List Pane
108 Managing Hosts