HP 3PAR Operating System Software - Manual (Page 34)

Description Column
Name of device that the port is connected to, for example, host1, cage0. Connected Device
Port firmware mode setting—Initiator, Target, Peer, or Suspended. Ports in Initiator mode
are connected to drive cages and ports in Target mode export to hosts. Suspended Mode
mode is for target ports that have not yet been initialized by the system (rare). Peer
mode is for Ethernet ports.
The partner port. Partner
The WWN of the partner port. Partner WWN
Indicates if the system is in a failover state. Failover State
Detail Pane
The detail pane provides detailed information about a selected port from the list pane. Information
is provided on up to four tabs, which include a Summary tab, and, depending on your system
setup, Physical Disks, SFP, Sessions, or Hosts tabs. Each are discussed in detail in the following :
“Viewing the Port Details Summary Tab” (page 34)
“Physical Disks Tab” (page 46)
“SFP Tab” (page 50)
“Sessions Tab” (page 41)
“Hosts Tab” (page 41)
Viewing the Port Details Summary Tab
The port details summary is displayed on the Summary screen.
Summary screen displaying FC port information:
Summary screen displaying Persistence Port information for Target mode FC:
Summary screen displaying RCFC port information:
34 Managing Ports