Installation and deinstallation, 2 installation and deinstallation – HP 3PAR Host Explorer Software User Manual
Page 11
HP 3PAR Host Explorer User Guide
2.1
Installation and Deinstallation
2
Installation and
Deinstallation
This chapter describes how to install, verify, and deinstall the HP 3PAR Host Explorer agent on
the following platforms:
■
Microsoft Windows Server 2003 and 2008, 32-bit and 64-bit
■
Red Hat Linux systems running RHEL 4 Update 6 or later; RHEL 5 and RHEL 6
■
Sparc systems running Oracle Solaris 10
NOTE: In order for the HP 3PAR StoreServ Storage system to dynamically discover
host devices, you must follow specific configuration instructions for the host
operating system and HBA. See the HP 3PAR Implementation Guides for
recommended practices and detailed configuration information about using your
specific host devices with the storage system.
NOTE: Each host connected to the HP 3PAR StoreServ Storage system must use a
host persona with the SCSI Enclosure Services LUN (SESLun) enabled, or the Host
Explorer agent cannot communicate with the HP 3PAR StoreServ Storage system.
If you upgraded from a version of the HP 3PAR OS released before 2.3.1, you must
convert your legacy personas to new host personas. For information about
configuring host personas, see the
HP 3PAR Command Line Interface
Administrator’s Manual or the HP 3PAR Management Console Online Help.