HP NC150T PCI 4-port Gigabit Combo Switch Adapter - Manual (Page 11)

Installing the Adapter
HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide 2-3
Connecting the Network Cable
IMPORTANT: Do not connect more than one NC150T PCI 4-port Gigabit Combo Switch Adapter port
to any single other switch model.
IMPORTANT: Do not use the NC150T PCI 4-port Gigabit Combo Switch Adapter as a cable
aggregator for servers with iLO and RILOE ports.
To secure the cable, plug the cable connector into the RJ-45 port. Ensure that the tab on the
plug clicks into position, indicating that it is properly seated.
For more information, refer to “UTP Cable Specifications” in Appendix C.