HP NC150T PCI 4-port Gigabit Combo Switch Adapter - Manual (Page 16)

C
Specifications
NC150T PCI 4-port Gigabit Combo Switch Adapter
Specifications
Table C-1: NC150T PCI 4-port Gigabit Combo Switch Adapter Specifications
Specification Description
Network Controller Chipset Broadcom® 5705KFB
Bus Type PCI
Bus Width 32 bits
Bus Speed 33 or 66 MHz
Standards Supported by NIC IEEE 802.1Q, 802.3ab, 802.3u, 802.3x, 802.3
Data Transfer Method Bus Master DMA
Switch Chipset BCM5385KPB and BCM5011KQM
Standards Supported by Switch IEEE 802.3ab, 802.3u, 802.3x, 802.3
Power Requirement Operating Voltage: 3.3V +/- 5%
Maximum Power Consumption: 7 Watts
Maximum: 2.1A @ 3.3V (DC)
Dimensions 14.5 cm x 10.7 cm, 5.7 x 4.20 inches (L x W)
Connector and Distances Four RJ-45 Connectors, Cable and lengths as follows:
10BASE-T: Category 3, 4, or 5 UTP 100 Meters (328 feet)
100BASE-TX: Category 5 UTP 100 Meters (328 feet)
1000BASE-T: Category 5 UTP 100 Meters (328 feet)
Interrupts Supported Automatically configured
Temperature Range Operating: 0
°
C to 55
°
C / 32
°
F to 131
°
F
Storage: -40
°
C to 65
°
C / -40
°
F to 149
°
F
Relative Humidity 5% to 95%, non-condensing
HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide C-1