HP ProBook 5220m Notebook PC - Manual (Page 60)

Connecting an external monitor or projector
The external monitor port connects an external display device such as an external monitor or a projector
to the computer.
▲ To connect a display device, connect the device cable to the external monitor port.
NOTE: If a properly connected external display device does not display an image, press fn+f4 to
transfer the image to the device. Repeatedly pressing fn+f4 alternates the screen image between the
computer display and the device.
External optical drive (purchased separately)
An external optical drive (purchased separately) expands the functionality of the computer. An external
optical drive allows you to read data discs, play music, and watch movies.
Identifying an external optical drive
▲ Select Start > My Computer.
You will see a list of all the devices installed on your computer, including a connected external optical
drive.
Playing music
NOTE: Be sure that the external optical drive is connected to your computer before beginning these
steps.
1. Turn on the computer.
2. Press the release button (1) on the external optical drive bezel to release the disc tray.
3. Pull out the tray (2).
4. Hold the disc by the edges and position the disc label-side up over the tray spindle.
NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
48 Chapter 4 Multimedia