HP LD4245tm 41.92-inch Interactive LED Digital Signage Display - Manual (Page 16)

Item Screen marks Description
(2) INPUT Changes the input source.
MENU Accesses the main menus, or saves your input and exits the menus.
Moves the selection up and down.
Adjusts the volume level.
AUTO/SET Displays the current signal and mode. Press this button to adjust the screen automatically (RGB
mode only).
Turns the power on or off.
Using the IR receiver
This allows a remote control sensor to be placed in a custom location.
The IR magnetic IR receiver must be placed on the front or side of the display. The IR receiver should
be in the remote control line of sight. The magnetic IR receiver must be placed on the screw location
(display frame).
NOTE: The IR receiver is made with a magnet. If it is attached to the side or the bottom of the
product, external shocks may cause the IR receiver to fall.
6 Chapter 3 Assembling and preparing