HP LD4245tm 41.92-inch Interactive LED Digital Signage Display - Manual (Page 53)

Component connection
Transmits the analog video and audio signals from an external device to the display. Connect the
external device and the display with the 15 pin signal to RCA cable as shown on the following
illustration. To display images by using progressive scan, make sure to use the component cable.
The VGA/RCA cable and audio-in cable are not provided with the display.
Back of the product:
NOTE: When connecting to the Component port using the shared interface, the port must match up
to the input source. Otherwise, noise may occur.
Connecting to a Computer, HD receiver, DVD, or VCR 43