Server fault indications flowchart – HP ProLiant BL45p Server series User Manual
Page 98
98
HP ProLiant BL45p Server Blade User Guide
Server fault indications flowchart
Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page
•
•
•
•
•
Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer
to
1
"Management agents (on page
)" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation
CD or on the HP
).
2 •
"Integrated
Management Log (on page
)" or in the HP
ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website
).
•
"Event list error messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD
or on the HP w
).
3
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
)
4
System Management Homepage at https://localhost:2381
)
5
"Power-on problems ("Server blade power-on problems
flowchart" on page
)" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website
).