HP StorageWorks XP Remote Web Console Software - Manual (Page 11)

entered from open-system hosts. When the administrator enters an RAID Manager command from
an open-system host, the RAID Manager command is transferred via the command device to the
target logical device.
To protect a logical device from RAID Manager commands, you must apply command device
security to the logical device. If command device security is applied to a logical device, the device
will not be affected by RAID Manager commands even when commands are transferred via a
command device to that device.
For details, see “Configuring the Storage System for Using RAID Manager” (page 84) .
You cannot use the following volumes as command devices:
•
Volumes that do not have Read/Write access attribute
•
Volumes reserved by XP Auto LUN. For more information, see HP StorageWorks
XP24000/XP20000 Auto LUN Software User Guide.
•
XP Continuous Access volumes
•
XP Business Copy volumes
•
Virtual volumes for HP StorageWorks XP Snapshot Software
•
Reserve volumes for Data Retention Utility
•
XP Continuous Access Journal volumes
•
System disks
•
Journal volumes
•
Pool volumes
•
Remote command device
•
Quorum disks
Configuring LUs for Use by RAID Manager 11