HP Officejet g55 All-in-One Printer - Manual (Page 37)

Chapter 7—Use the scan features 33
HP OfficeJet G Series
2 After the Network Scan Setup dialog box appears, choose one of the following:
•
To scan your original and send it directly to a specific destination, go to the
Send To list, and select the appropriate destination. In the Image Type area,
select the image type, and then click OK.
• To scan your original and preview each page, select the Preview each page
check box, and then click OK.
The Scan Reservation dialog box appears, and the HP OfficeJet is temporarily
reserved for your scan.
3 Go to the HP OfficeJet, and load your original.
For more information, see “Load originals on the glass” or “Load originals in the
automatic document feeder (ADF).”
4 Choose one of the following:
•
To continue from the HP OfficeJet, press START SCAN. If you did not select
Preview each page, the HP OfficeJet scans the original and sends the output to
the selected destination.
• To continue from your PC, go to the Scan Reservation dialog box, and click
Scan Now.
If you used the glass, or if you used the ADF and selected Preview each page, the
HP OfficeJet scans the first (or only) original and then displays it in the Scan
window for you to edit, save, or send to a program.
5 If you used the ADF and have additional pages to scan, click Scan Next Page when
you are ready to continue.
AvPrn.book Page 33 Monday, February 28, 2000 11:13 AM