HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 98)

98 Managing ports
Port Information data window
The Port Information data window displays detail information for the selected port. Click the Port Info data
window tab in the faceplate display to open the Port Information data window.
Total Rx Frames Total number of frames received by the port
Total Rx Words Total number of words received by the port
Total Tx Frames Total number of frames transmitted by the port
Total Tx Words Total number of words transmitted by the port
Tx Link Resets Number of link reset primitives sent from this port to an attached
port
Total Offline Sequences Total number of offline sequences transmitted and received by
the port
Table 22 Port Statistics data window entries (continued)
Entry Description
Table 23 Port Information data window entries
Entry Description
Port Address Port FC address
Administrative Port Type The administrative port type (G, GL, F, or FL).
This value is persistent; it will be maintained
during a switch reset. During port
auto-configuration, it will be used to determine
which operational port states are allowed.
Operational Port Type The port type that is currently active. This will be
set during port auto-configuration based on the
administrative port type.
Administrative Port State The port state (Online, Offline, Diagnostics, or
Down) which has been set by the user. This state
may be different from the configured
administrative state if the user has not saved it in
the switch configuration. This state is used at the
time it is set to try to set the port operational
state. This value is not persistent and will be lost
on a switch reset.
Operational Port State The port state that is currently active. This value
may be different from the administrative port
state, for example due to an error condition.
Configured Administrative Port State The port state (Online, Offline, Diagnostics, or
Down) which is saved in the switch
configuration, either by the user or at the factory.
This value is persistent; it will be maintained
during a switch reset, and will be used after a
reset to set the port operational state.
Logged In Indicates whether logged in or not
E Port Connection Status E_Port connection status. Status can be None,
Connecting, Connected, or Isolated.
E Port Isolation Reason Why E_Port is isolated