3 using hp iias, Overview, Hp iias gui – HP Intelligent Infrastructure Analyzer Software Licenses User Manual
Page 8
3 Using HP IIAS
Overview
HP IIAS is a real-time solution to monitor and diagnose the SFPs on the FC Switch.
This chapter discusses the following topics:
•
•
“HP IIAS Navigation Menus” (page 9)
The following procedure provides a brief overview of using HP IIAS:
1.
Specify the SAN Profile details, which include the SAN profile name and options.
2.
Specify the switches to be monitored.
3.
Activate the profile.
4.
Track the inventory of the physical components in the SAN and their connectivity among each
other through SAN Inventory and Topology.
5.
View the event notifications and diagnostics.
6.
Optionally, you can generate reports.
HP IIAS GUI
1.
Launch the HP IIAS with the URL (http:\\<IPaddress of installed
system>:<portnumber>\IIASClient) OR by double-clicking the HP IIAS shortcut icon on the
desktop. The HP IIAS login page is displayed, as shown in
.
TIP:
If the product is installed on a system, for example: IP address: 1.2.3.4. While installing
the product, if port 8080 is already in use then the installer prompts the user to provide an
alternate port number. Otherwise, if port 8080 is available, the product uses that port and in
this case the installer does not prompt the user for the port number. Then, to use the IIAS
application enter: http://1.2.3.4:8080/IIASClient address in the address bar.
Figure 1 Login page
2.
Login with the UserName and Password.
8
Using HP IIAS