HP StorageWorks 1510i Modular Smart Array - Manual (Page 48)

2. Select the newly created Portal Group > Assign Portals. Expand the Port Name drop-down box and
select a port on the redundant Ethernet iSCSI module for this target portal group to use. After the
portals associated with the selected logical port are displayed, select the TCP portals to use.
Configuration status - after creating storage targets
Figure 12 illustrates the current configuration.
The following items are configured:
• Management port MA0 and MB0
• Data ports SA0, SA1, SB0, and SB1
• Physical hard drives, into arrays and logical drives
• Targets
• Target 1
• Target 2
• Target 3
48 Configure