HP Linux Server Management Software - Manual (Page 40)

Toolkit utilities 40
Category Options Description
HBA ConnectionName
HBA_WW_ID
HostMode
These options specify an HBA that is to be configured.
Control category
The Control category has the following options:
• Action mode (on page 40 )
• Method mode (on page 40 )
Action mode
You must specify an Action mode:
• In Configure mode, you can create new arrays, but you cannot modify existing arrays. The controller
must be connected to unassigned physical drives for this mode to be available.
• In Reconfigure mode, you can modify existing arrays. For example, you can set up an array expansion,
a logical drive extension, or a migration. These procedures do not destroy data, unless you specifically
want the data to be deleted. In this mode, ACU does not change an existing option setting unless you
specifically script a different value for that option.
Method mode
The default value for this option is Auto. If you want to use Custom mode, you must specify it.
In Auto mode, ACU can perform an expansion, extension, or migration without user intervention if the values
that you set for other options imply that such an operation is necessary.
Controller category
The Controller category has the following options:
• Controller (on page 41 )
• ChassisName (on page 41 )
• ClearConfigurationWithDataLoss (on page 41 )
• DeleteLicenseKey (" LicenseKey, DeleteLicenseKey " on page 41 )
• DPOEnable (" Video performance options " on page 43 )
• ElevatorSortEnable (" Video performance options " on page 43 )
• ExpandPriority (" RebuildPriority, ExpandPriority " on page 42 )
• IRPEnable (" Video performance options " on page 43 )
• LicenseKey (" LicenseKey, DeleteLicenseKey " on page 41 )
• MNPDelay (" Video performance options " on page 43 )
• PreferredPathMode (on page 41 )
• QueueDepth (" Video performance options " on page 43 )
• ReadCache (" ReadCache, WriteCache " on page 42 )