HP XP7 Storage - Manual (Page 25)

3. Enter a resource group name in the Create Resource Groups window.
Parity groups, LDEVs, ports, or host groups can be specified as follows:
1. Click Select resource-name. For example, click Select Parity Groups.
2. Select resources from the Available resource-name table.
3. Click Add resource-name table.
The added resources move to the Selected resource-name table.
You can click Remove to move resources from the Selected to the Available
resource-name
table.
4. Click OK.
The Create Resource Groups window
4. Click Add.
The resource group is added to Selected Resource Groups table.
If you select a row and click Detail, the Resource Group Properties window appears.
If you select a row and click Remove, a message appears that asks if you want to remove the
selected row. If you want to remove the row, click OK.
5. Click Finish.
6. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If you select a row and click Detail, the Resource Group Properties window appears.
If Go to tasks window for status is checked, the Tasks window opens.
Adding resources to a resource group
Before adding resources to a resource group, consider the following:
•
You must have Security Administrator (View & Modify) role to perform this task.
•
No resource can be added to meta_resource.
•
Only resources allocated to meta_resource can be added to resource groups.
•
An LDEV with the same pool ID or journal ID cannot be added to multiple resource groups.
For example, when two LDEVs belong to the same pool, you must allocate both to the same
resource group. You cannot allocate them separately. Use the sort function to sort the LDEVs
by pool ID or journal ID, then select them and add them all at once.
•
If virtual storage machine attributes differ between meta_resource and the resource group:
LDEVs cannot be added to the resource group when virtual LDEV IDs are assigned to
LDEVs in meta_resource. ◦
◦ LDEVs and host groups cannot be added to the resource group when LUN paths are
assigned to LDEVs and host groups in meta_resource.
Procedure 2 To add resources to a resource group
1. In the Remote Web Console main window, in the Storage Systems tree, click Administration,
and then Resource Groups.
2. Click a resource group to add in the Resource Groups tab.
3. Click Add Resources.
4. Select the type of resources to add in the resource group.
5. Select one or more resources to add to the resource group, and then click Add.
6. Click OK, and then click Finish.
Adding resources to a resource group 25