HP XP7 Storage - Manual (Page 132)

Automatic completion of a SIM
Some SIMs are completed automatically when you resolve the problem that caused the SIM. SOM
734 must be enabled for automatic completion of a SIM. Automatic completion of a SIM removes
it from the system with no additional manual intervention. After the SIM is automatically completed,
the status of the SIM changes to completed.
The following SIMs occur when the usage level of the pool exceeds the threshold. They are
automatically completed when you resolve the problem causing the SIM.
•
SIMs 620XXX, 625000, and 626XXX are automatically completed if you increase pool
capacity by adding pool-VOLs because the condition that caused the SIM removed.
•
SIMs are automatically completed in the following cases:
SIM 620XXX
If the usage level of THP pool number XXX falls below the warning threshold, SIM is
automatically completed.
◦
◦ SIM 625000
If the usage level of each THP pool in all pools of the storage system falls below the
depletion threshold, SIM is automatically completed.
◦ SIM 626XXX
If the usage level of THP pool number XXX falls below the depletion threshold, SIM is
automatically completed.
Manually completing a SIM
The Storage Administrator (System Resource Management) role is required to perform this task.
Some SIMs must be manually completed to clear them from the system.
After the trouble that caused the SIM is solved, you can manually complete the SIM. After manually
completing a SIM, the status of the SIM changes to completed. If you complete the SIM before the
underlying cause is solved, the SIM may reoccur.
1.
Change the status of the pool whose usage level exceeds the threshold to normal. For
information about the solutions when the pool usage level exceeds the threshold, see
“Troubleshooting Thin Provisioning Z” (page 150) .
2. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
The pool name appears below Pool.
3. Click More Actions, and then select Complete SIMs.
OR
From Pool in the Actions menu, select Complete SIMs.
The Complete SIMs window opens.
4. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
It takes time if many SIMs need to be completed.
If Go to tasks window for status is checked, the Tasks window opens.
You can check whether a SIM completes successfully in the Remote Web Console main window.
132 Configuring thin provisioning