HP Color LaserJet Pro MFP M476 series - Manual (Page 59)

Scan to a network folder
Use the product control panel to scan a document and save it to a folder on the network.
NOTE: In order to use this feature, the product must be connected to a network and the Scan to Network
Folder feature must be configured by using the Scan to Network Folder Setup Wizard (Windows) or the
HP Embedded Web Server.
1. Load the document on the scanner glass according to the indicators on the product.
2. From the Home screen on the product control panel, touch the Scan button.
3. Touch the Scan to Network Folder item.
4. In the list of network folders, select the folder to which you want to save the document.
5. The control panel screen displays the scan settings.
● If you want to change any of the settings, touch the Settings button, and then change the settings.
● If the settings are correct, go to the next step.
6. Touch the Scan button to start the scan job.
ENWW Scan to a network folder 49