HP LaserJet P1005 Printer - Manual (Page 64)

Change the printer separation pad
Normal use with good media causes wear. The use of poor media might require more frequent
replacement of the separation pad.
If the device regularly pulls multiple sheets of media at a time, you might need to change the separation
pad.
NOTE: Before you change the separation pad, clean the pickup roller. See Clean the pickup roller
on page 53 .
WARNING! Before changing the printer separation pad, turn the device off by unplugging the power
cord, and wait for the device to cool.
1. Unplug the device from the wall outlet.
2. Remove paper and close main input tray. Set device on its front.
3. At the bottom of the device, unscrew the two screws holding the separation pad in place.
54 Chapter 6 Managing and maintenance ENWW