HP XP P9500 Storage - Manual (Page 276)

Displayed item
Description
No summary
displayed
Summary
displayed
When a virtual ID is not used, a hyphen (-) is
displayed.
Physical-
ChaPort - When a path is migrated using a virtual ID, displays
port number of the CHA that is connected by the
migration-destination path.
When a virtual ID is not used, a hyphen (-) is
displayed.
- Paths Total number of the paths recognized by HDLM for
the LU to be displayed.
- OnlinePaths Number of available paths in the displayed paths,
indicated by a decimal number. When the value of
Paths equals the value of OnlinePaths, all paths
are online. If the value of OnlinePaths is less than
that of Paths, some paths are offline. In this case,
you should check the offline paths and take
appropriate action for any paths that have an error
status.
Legend:
-: Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -item
parameter.
- all was specified.
- No value was specified for the parameter.
#2
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -c -item
parameter.
- all was specified.
- No value was specified for the parameter.
#3
This storage system applies when the dynamic I/O path control function is
disabled.
To Display HBA Port Information
-hba
Use this parameter to display information about the paths to each HBA
port. HDLM displays the unique HBA port ID assigned to each HBA port.
This HBA port ID can also be used in Offline and Online operations. The
following table lists and describes the displayed items.
6-64
Command Reference
Hitachi Dynamic Link Manager User Guide for AIX ®