Int roduct ion – HP Designjet 9000s Printer series User Manual
Page 16
●
It displays warning and error messages when appropriate.
●
It can be used to change the values of printer settings, changing the operation of the printer.
The front panel has the following components:
1.
The LEDs light, flash, or turn off to indicate the status of the printer.
A. The green Data LED shows the data reception state.
●
Flashing: data are being received from the computer
●
Off: nothing is being received from the computer
B. The orange Error LED indicates whether an error has occurred.
●
On: an error has occurred
●
Flashing: warning state (take-up reel time-out error)
●
Off: normal (no error has occurred)
C. The green Ink LED shows the status of the ink cartridges.
●
On: all ink cartridges are present
●
Flashing: ink is running out in at least one cartridge
●
Off: no ink (ink has run out in at least one cartridge)
D. The green Media LED shows whether media is loaded.
●
On: media is loaded (roll or cut sheet)
●
Off: no media is loaded
6
Chapter 1 Introduction
ENWW
Int
roduct
ion