HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 43)

Domain management 43
• connUnitPortStatusChange (1.3.6.1.3.94.0.6)
INFO—The overall status of the connectivity unit has changed. Sent whenever any of the following
notifications occur:
o UserPort.StateChange
o UserPort.OperChange
• coldStart
CRITICAL—A coldStart trap signifies that the SNMP agent is reinitializing itself and that its
configuration might have been altered.
• authenticationFailure
CRITICAL—An authenticationFailure trap signifies that the SNMP agent has received a protocol
message that is not properly authenticated.
VC domain status change notifications
When a VC domain changes status, VC Manager generates a trap. The state changes are:
• NORMAL—The component is fully functional.
• CRITICAL—The component is incapable of managing installed VC components.
• MAJOR—One or more of the component's subsystems are not operating properly, causing serious
disruption to functions.
• MINOR—One or more of a component's subsystems are not operating properly, causing slight
disruption to functions.
• WARNING—The component has a potential problem.
• UNKNOWN—VC Manager has not yet established communication with the component.
SNMP Settings (SNMP Enet Settings)
By enabling SNMP for VC-Enet modules, network management systems can monitor VC-Enet modules in
the domain for events such as warnings and errors that might require corrective actions. The user must
have network administrator privileges to administer SNMP Enet settings.