HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 56)

Network management 56
Task Action
Change the connection mode Click the down arrow in the box next to Connection Mode, and then
select Auto or Failover. For a description of these modes, see "Defining
a network (on page 51 )."
Delete an added port Click X in the Delete column for that port.
View updated information on the
network Click Refresh.
Delete the network Click Delete.
Clear unsaved changes on the screen Click Clear.
Save changes and remain on this
screen
Click Apply.
Cancel without saving changes and
return to the summary screen
Click Cancel.
Ethernet Networks (Server Connections) screen
To access this screen, click the Ethernet Networks link in the left VC Manager navigation window, and
then click the Server Connections tab.
This summary screen lists the server ports connected to each network in the Virtual Connect domain. This
screen is viewable by all authorized users.
The following table describes the columns within the Ethernet Networks (Server Connections) screen.
Column name Description
Ethernet Networks Shows the overall network status, network name, and PID state