HP SmartStart-Software - Manual (Page 23)

Toolkit utilities 23
Using toolkit utilities
The Toolkit utilities control the installation process, read the source server configuration, and duplicate the
configuration on a target server through a generated script file.
The Toolkit utilities include:
• CONREP
• HPACUSCRIPTING
• HPDISCOVERY
• HPONCFG (Utility only supports HP ProLiant 300/500/700 and Blade Servers)
• HPLPCFG
• HPQLAREP
• HWQUERY
• IFHW
• LO100CFG (Utility only supports HP ProLiant 100 series servers)
• RBSURESET
• REBOOT
• SETBOOTORDER (Limited functionality for HP ProLiant 100 series servers)
• STATEMGR (Utility is not supported on 100 series servers)
Using REBOOT
REBOOT is used from a batch file, in conjunction with other utilities, to control server reboots. This utility
enables the user to reboot the server with control over which device is the boot device. If no boot drive
argument is passed on to REBOOT, the tool reboots the server using whichever drive is specified as the
default drive.
NOTE: For HP ProLiant 100 series servers only one device can be set as the boot device and
the other devices cannot be re-ordered.
REBOOT command-line syntax
REBOOT [DRIVE:] [/?]
REBOOT command-line arguments
Command-line argument Description
[DRIVE:] Valid arguments that can be passed to REBOOT are A:, C:, CD, PXE,
RBSU, or no argument. By specifying an argument, the drive indicated
is set to boot on the next reboot, and the system is restarted. If no
argument is provided, the system is set to boot using the defined boot
order.
/? This argument displays help information.