HP ProLiant DL385p Gen8 Server - Manual (Page 14)

Component identification 14
Rear panel LEDs and buttons
Item Description Status
1 UID LED/button Off = Deactivated
Solid blue = Activated
Flashing blue = System being managed remotely
2 Power supply 2
LED Off = System is off or power supply has failed.
Solid green = Normal
3 Power supply 1
LED
Off = System is off or power supply has failed.
Solid green = Normal
4 NIC activity LED Off = No network activity
Solid green = Link to network
Flashing green = Network activity
5 NIC link LED Off = No network link
Green = Network link
Non-hot-plug PCIe riser board slot definitions
Primary
Slot - form factor PCIe 2 riser slot description Secondary
Slot - form factor
PCIe 2 x16 riser slot description
1 - FL/FH PCIe2 x16 (8,4,1) 4 - FL/FH PCIe2 x16 (16, 8, 4, 1)
2 - HL/FH PCIe2 x8 (8,4,1) 5 - HL/FH PCIe2 x16 (8, 4, 1)
3 - HL/FH PCIe2 x8 (4,1) 6 - HL/FH PCIe2 x8 (8, 4, 1)
Notes:
• "Primary" denotes the riser cage is installed in the primary riser connector.
• "Secondary" denotes the riser cage is installed in the secondary riser connector.
• Installing the riser cages listed in the table above in either the primary or secondary riser connectors
determines the form factor of the PCI cards supported by those riser cages.
• FL/FH denotes full-length, full-height. HL/FH denotes half-length, full-height. LP denotes low profile.