HP LD4210 42-inch LCD Digital Signage Display - Manual (Page 14)

3 Setting up the display
To set up the display, ensure that the power is turned off to the display, media player/computer system,
and other attached devices, and then follow the instructions below.
Installing the stand (sold separately)
1. Take the parts for the stand out of the box.
● HP LD4201 and LD4210—Four screws M4 x 32 mm (1.26 in) and stand
Figure 3-1 HP LD4201 and LD4210—Stand accessory contents
● HP LD4710—Four screws M4 x 10 mm (0.39 in) and stand
Figure 3-2 HP LD4710—Stand accessory contents
6 Chapter 3 Setting up the display ENWW