HP LD4210 42-inch LCD Digital Signage Display - Manual (Page 44)

Icon Main menu Submenu Description
Network Setup Select the method of assigning an IP address to the display.
IP Mode options:
● DHCP—Allows the display IP Address to be assigned
automatically when the display is attached to the network
through a router.
● Manual—Allows you to assign the IP Address, Subnet
Mask, Gateway, and DNS Server.
See your network administrator for the correct manual entries to
enter. For more details on setting the display IP Address, refer
to the HP Network Sign Manager User Guide (available in
English only) included on the CD provided with the display.
Information Contains the Serial No., SW Version (MNT), SW Version
(LAN), IP Address, and MAC Address information.
Factory Reset Resets to the default factory settings.
TILE Tile Mode Tile Mode is used when multiple displays are configured in a
video wall and you want the image to be displayed on the
entire video wall, with each display showing its part of the total
image on the video wall.
To use Tile Mode, the multiple displays must be connected
with RGB IN/RGB OUT or DP IN/DP OUT. If you want to
issue commands to the displays in the wall with application
software or with the HP Network Sign Manager connected
through the serial interface, the displays must be connected
with RS-232-C IN/OUT.
For more information, refer to Using Tile Mode on page 40 .
Tile ID Selects the location of the Tile by setting an ID of 1–25.
Natural Mode Setting this feature ON will compensate for the mullions (non-
viewing area between active viewing areas in the video wall
where the display bezels meet) by stretching the image in each
display in the video wall so that the image is extended into the
non-viewing areas of the mullions. This eliminates image
distortion and displays the image in its natural proportions
across all displays.
H Size Adjusts the horizontal size of the screen taking into account the
size of the bezel.
V Size Adjusts the vertical size of the screen taking into account the
size of the bezel.
H Position Moves the screen position horizontally.
V Position Moves the screen position vertically.
Reset Resets the Tile Mode configuration.
USB Photo List View photo files on a USB storage device.
Music List Play music files on a USB storage device.
36 Chapter 4 Operating the display ENWW