HP ProLiant BL465c G6 Server-Blade - Manual (Page 30)

Hardware options installation 30
4. Remove the mezzanine connector cover.
5. Install the mezzanine card. Press down on the connector to seat the board.
6. Install the access panel (on page 14 ).
7. Install the server blade (" Installing a server blade " on page 18 ).
HP Smart Array E200i Battery-Backed Write Cache
module option
To install the component:
1. Power down the server blade (on page 12 ).
2. Remove the server blade (on page 13 ).
3. Remove the access panel (on page 14 ).
4. Remove the hard drives.