Show drive access, Show drive hostport, Show drive access show drive hostport – HP Command View for Tape Libraries Software User Manual
Page 221
show drive access
Description
Shows which hosts have access to one or more tape drives. For each tape
drive, a list of hosts appears. For each host, the target LUN that gives the host
access to the drive is shown.
Syntax
show drive access [drive_num] | [all]
Availability
All users and modes
Operands
Specify the tape drive for which to display access information.
The access information may be displayed for all tape drives
by specifying all for this operand. This operand is required.
drive_num
Examples
To show tape drive access information for drive 1:
/>show drive access 1
Access information for drive 1:
Host Host Name WW Node Name LUN Port
1 myhost1 FFFFFFFFFFFFFFFFFFFF 1 1
See also
show drive hostport
Description
Shows hostport settings for one or more tape drives.
Syntax
show drive hostport [drive_num] | [all] [port_num] | [all]
Availability
All users and modes
Operands
Specify the tape drive for which to display the hostport settings.
The interface information may be displayed for all tape drives
by specifying all for this operand. This operand is required.
drive_num
port_num
Specify the port on the specified tape drive for which to display
the hostport settings. The interface information may be displayed
for all ports on the tape drive by specifying all for this
operand. This operand is required.
Examples
To show interface information for port 2 on drive 1:
/>show drive hostport 1 2 1
Drive port settings: Config Actual Config Actual Config Actual
Drive # WW Port Name Mode Mode Speed Speed ALPA ALPA
------- ----------------------- -------- -------- ------ ------ ------ ------
2 50.01.04.F0.00.79.F5.B4 N-Port Fabric 4 Bps 0 Bps EF EF
See also
show drive access 221