HP XP Performance Advisor Software - Manual (Page 19)

• LDEV menu
• Settings menu
Array menu
The Array menu appears after you start XPWatch. This menu lists all the arrays that are connected to
the host.
The Array menu also displays the XPWatch version. You can also view the XPWatch version using
the following command in the command prompt:
XPWatch.exe -v
Figure 6 shows the screen that displays the XPWatch version.
Figure 6 XPWatch version
.
To select an array, enter the number (Num) corresponding to it. For example, to select the 10055
array, enter 1.
NOTE:
You can select only one array at a time.
Figure 7 shows the Array menu.
Figure 7 Array menu
.
Table 6 lists the fields of the Array menu.
Table 6 Array menu — fields
Description Screen field
Selection number Num
Serial number of the array Serial
Type of the array Type
XPWatch and XPSketch Reference Guide 19