HP XP Performance Advisor Software - Manual (Page 26)

Figure 16 Port menu
.
Table 8 describes the fields that appear in the Port menu.
Table 8 Port menu — screen fields
Description Screen field
Selection number Num
Port number Port
Slot number Slot
Type of port (SCSI, Fibre, ESCON, iSCSI, ENAS) Type
Connection type (N for point-point, NL for FC-AL) Topo
Fabric login (Y/N) FLOGI
Operating mode of the port (Target, MCU Initiator, RCU Target, e-LUN
initiator)
Mode
Security switch (On/Off) Secu
Storage Logical Partition (SLPR) number Slpr
Count of DKAs associated with LDEVs mapped to port DKA#
Count of RAID Groups mapped to port Dg#
Count of LDEVs mapped to port LDEV#
Count of LUSE members Lh#
Viewing Port menu
To view the ports connected to a host, perform the following steps:
1. Start XPWatch. The Array menu appears.
2. Select the array whose performance you want to monitor and press the Enter key.
3. The Available Host Groups screen displaying the list of host groups connected to the array is
displayed.
Working with XPWatch menus and commands 26