HP Hitachi Dynamic Link Manager Software - Manual (Page 222)

Return
Code
Explanation
¢
A communication error with the host occurred.
Action
Use the dlnkmgr command to verify that the host can be accessed
from the remote management client, and then retry the operation. If
the same error occurs again, execute the DLMgetras utility for
collecting HDLM error information, and then contact your HDLM
vendor or maintenance company if you have a maintenance contract
for HDLM. For details on the DLMgetras utility, see The DLMgetras
Utility for Collecting HDLM Error Information on page 7-2 .
1059 Details
The specified host is not registered in the Credential Store on the
remote management client.
Action
Verify that the specified host is registered in the Credential Store on
the remote management client. If the host is registered in the
Credential Store, execute the DLMgetras utility for collecting HDLM
error information, and then contact your HDLM vendor or
maintenance company if you have a maintenance contract for HDLM.
For details on the DLMgetras utility, see The DLMgetras Utility for
Collecting HDLM Error Information on page 7-2 .
1061 Details
A value outside the valid range is specified for the check interval of
the dynamic I/O path control function.
Action
Specify a value in the range from 5 through 1440 for the check
interval of the dynamic I/O path control function, and then retry the
operation.
8-64
Messages
Hitachi Dynamic Link Manager User Guide for VMware ®