HP SAN - Manual (Page 19)

2. Click Add. The switch group name appears in the SAN explorer area under the SAN name.
NOTE:
To add multiple switch groups under the SAN, repeat the steps 1-2.
3. Click Next to enter the switch details.
Specifying switch details
The Switch Settings window enables you to search, add, and modify all the connected switches.
Figure 4 shows the Switch Settings window.
Figure 4 Switch Settings window
Adding a switch
To add a switch, complete the following steps:
1. Click Switch Settings from the navigation area. The Switch Settings window is displayed in the
main display area.
2. Select one of the following options from the main display area:
• IP Address: If you know the IP address of the switch to scan.
a. Enter the IP address of the switch to be scanned in the IP Address box, as shown in Figure
4 .
b. Select Discover connected switches check box if you want to discover all the connected
switches.
c. Enter the access information, as required, to initiate data capture for the selected switch.
HP StorageWorks Essentials SAN Visibility 3.1 user guide 19