Removing iocp files, Specifying hba-host map details, Advanced settings window – HP SAN User Manual
Page 26
1.
Click Advanced Settings from the navigation area of the SAN Visibility GUI.
displays the Advanced Settings window.
Figure 9 Advanced settings window
2.
Click Load to select an IOCP file.
IMPORTANT:
SAN Visibility does not generate IOCP files.
Removing IOCP files
To remove an IOCP file, complete the following steps:
1.
Select the IOCP file you want to remove
2.
Click Remove.
The selected IOCP file is removed.
Specifying HBA-Host map details
HBA-Host map file is a .csv file (comma separated file), which contains HBA-Node WWN and host
mapping details. If this map file is provided in the raw report, then the processed report maps the
HBA-Node WWNs to the host names, and the same information is displayed in the processed report.
You can create a new HBA-Host map file or you can import an existing HBA-Host map file.
Using SAN Visibility
26