HP XP P9000 Auto LUN Software - Manual (Page 26)

Stopping the Auto Migration function
Before creating a manual migration plan, the Auto Migration function must be disabled. If you
perform a manual migration operation, all current Auto Migration plans are canceled.
Procedure 6 To stop the Auto Migration function:
1. Click Actions
→Other Function→Auto LUN to open the Auto LUN window.
2. Click to change to Modify mode.
3. In the Auto LUN window, click Auto LUN. A different window appears.
4. Click the Auto Plan tab to display the “Auto Plan window” (page 52) .
5. Click Delete All to stop all current auto migration plans.
6. Set the Auto Migration function to Disable.
7. Click Set to apply the settings to the storage system.
Reserving a volume
To perform manual or auto migration, volumes in a HDD class must be in Reserve status to be
considered as target volume candidates. Auto LUN cannot take place when no volumes are
reserved.
Prerequisites
•
The volume meets all requirements as a target volume candidate
Procedure 7 To reserve a volume:
1. Click Actions
→Other Function→Auto LUN to open the Auto LUN window.
2. Click to change to Modify mode.
3. In the Auto LUN window, click Auto LUN. A different window appears.
4. Click the Attribute tab to display the “Attribute window” (page 55) .
5. In the navigation tree, double-click the HDD class in which you would like to reserve a volume.
The HDD class folder expands and parity groups in that HDD class can be viewed.
6. In the expanded HDD class folder, select a low-usage parity group.
The volumes contained in the selected parity group load in the “Parity Group list” (page 57) .
26 Auto LUN operations