HP LaserJet 9050 Printer series - Manual (Page 33)

ENWW Alerts 27
To test the configuration of a destination list
Use the following procedure to test the destination list configuration.
1 Click the Test button next to the destination list that you want to test.
The following window appears. (This illustration shows the screen from a system that has a
permanent storage device installed. If no permanent storage device is installed, only one
destination can be tested from this window.)
2 If you have a permanent storage device installed, select the destinations that you want to
test.
3 The return address is the product’s e-mail address. Type your e-mail address in the Return
Address box if you would like to receive messages about any errors that are generated from
the test alert (for example, to be notified of an incorrect destination address).
4 If applicable, type additional information that you would like to appear at the beginning of the
e-mail alert message in the Your Notes (optional) text field.
5 Click OK.