Wake time – HP LaserJet 9050 Printer series User Manual
Page 43
ENWW
Wake Time 37
Wake Time
An IT administrator can use the Wake Time screen to schedule product wakeups on a daily
basis. For example, the product can be set to wake up at 07:30, so the product has finished
initializing and calibrating and is ready to use by 08:00. The administrator only sets one wakeup
setting per day; however, each day can have a different wakeup setting. Additionally, to save
energy, the sleep delay can be set to turn the product off after a specific period of inactivity.
1
2
3
Callout Area on the screen
Information or capability that the area provides
EWS tabs and menus
For more information, see
“Navigating through the HP Embedded
Wake Time
Select one or more days on which to use the wakeup setting, and
then set the time the product is turned on each day.
Sleep Delay
Set the amount of time the product is idle before it goes into
Sleep Mode. When the product is in Sleep Mode, it uses less
energy.
1
2
3