HP StorageWorks XP Remote Web Console Software - Manual (Page 14)

• Sun® Solaris™ 8 or better. For further information on the Solaris™ platform, refer to the
HP StorageWorks XP Remote Web Console user guide for XP12000/XP10000
• HP-UX 11.0 or better. For further information on the HP-UX platform, refer to the HP StorageWorks
XP Remote Web Console user guide for XP12000/XP10000
• Windows 2000 Advanced Server (Service Pack 3 or later)
• AIX 5L Version 5.1 ML3
Oracle database
One of the following Oracle databases is required.
• Oracle8i
• Oracle9i
• Oracle9i Release2
NOTE:
Oracle database needs to be constructed in RAW volume. Also, you need to set DB_BLOCK_CHECKSUM
parameter to TRUE.
Logical Volume Manager
One of the following Logical Volume Manager versions is required.
• VxVM (for Solaris™)
• LVM (for HP-UX )
• LVM (for AIX )
NOTE:
Versions other than above may be supported in the future enhancement. For the latest information,
contact your HP account support representative.
Restrictions and conventions
When you use Data Integrity Check, or when Data Integrity Check is installed, the following restrictions
and conventions are applied.
For arrays:
• You cannot downgrade the microcode (DKCMAIN program) version.
• You cannot replace an existing CHIP which supports Data Integrity Check with a CHIP which
does not support Data Integrity Check.
• If you uninstall the Data Integrity Check license key, you need to delete the settings of the volume
to be checked by Data Integrity Check from RAID Manager in advance.
• The setting of Data Integrity Check can only be deleted using RAID Manager.
• If you want to change the configuration of the LDEVs (for example, decreasing the set LDEVs,
creating CVs), you need to delete the setting of Data Integrity Check using RAID Manager
first, and then perform the change.
14 Data Integrity Check operating environments and prerequisites