HP Color LaserJet 4700 Printer series - Manual (Page 71)

Menu item Values Description
SOURCE
ADJUST TRAY [N]
that is printed on the front with the image
that is printed on the back.
PRINT TEST PAGE: Prints a test page that
shows the current registration settings.
SOURCE: Allows you to select the tray for
which you want to print the test page. If
installed, optional trays appear as
selections, where [N] is the number of the
tray.
ADJUST TRAY [N]: Sets the registration
fro the specified tray, where [N] is the
number of the tray. A selection appears for
each tray that is installed, and registration
must be set for each tray.
● X1 SHIFT: Registration of the image
on the paper from side to side, as the
paper lies in the tray. For duplexing,
this side is the second side (back) of
the paper.
● X2 SHIFT: Registration of the image
on the paper from side to side, as the
paper lies in the tray, for the first side
(front) of a duplexed page. This item
appears only if a duplexer is installed
and enabled. Set the X1 SHIFT first.
● Y SHIFT: Registration of the image on
the paper from top to bottom, as the
paper lies in the tray.
AUTO SENSE MODE TRAY 1 SENSING
TRAY 2-N SENSING
Allows you to set trays to automatically
sense the type of paper loaded. For more
information, see the section entitled
Automatic media type sensing (auto sense
mode)
.
PRINT MODES A list of available modes appears. Allows you to associate each media type
with a specific print mode.
OPTIMIZE A list of available parameters
appears.
BELT CONTACT
CACO3 PAPER
TALC PAPER
BACKGROUND 1
BACKGROUND 2
TRANSPARENCY
MEDIA TYPE
REGISTRATION
LONG PAPER
Allows you to optimize certain parameters
for all jobs rather than optimizing by media
type.
ENWW Configure device menu 55