HP ENVY 5530 e-All-in-One Printer - Manual (Page 55)

Tips for working with cartridges
Use the following tips to work with cartridges:
● To protect the cartridges from drying out, always turn the printer off using the On button, and
wait until the On button light goes out.
● Do not open or untape cartridges until you are ready to install them. Leaving tape on the
cartridges reduces ink evaporation.
● Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color
and icon for each slot. Make sure the cartridges snap into place.
● After you insert new cartridges, align the printer for best print quality. See Improve print quality
on page 70 for more information.
● When the Estimated Ink Levels screen shows one or both cartridges in a low state, consider
getting replacement cartridges to avoid possible printing delays. You do not need to replace the
cartridges until print quality becomes unacceptable. See Replace the cartridges on page 46 for
more information.
● If you receive a carriage stalled error, try clearing carriage jam. See Clear carriage jam
on page 68 for more information.
● If you remove a cartridge from the printer for any reason, try to replace it again as soon as
possible. Outside of the printer, if unprotected, cartridges begin to dry out.
ENWW Tips for working with cartridges 51